MISR VISION has been representing the biggest names in food industry innovative solutions through its European principals.
Tomra Sorting & Peeling Solutions
Steam Peeling
TOMRA Sorting Food has been designing and supplying superior potato and root vegetable peeling machines for over 40 years. The focus has been on continuously improving efficiency, yield and quality of the steam peeling process, while reducing peel loss.
More than 480 TOMRA steam peelers are installed at leading potato and vegetable processing plants around the world. TOMRA offers a range of solutions for processors to address your needs. Today companies are investing in potato peeler machines which offer significant savings in raw material costs, maintenance and energy costs.
Today 75% of the world’s French fries are processed by TOMRA’s peeling equipment.TOMRA’s steam peeling line can be used on a variety of root vegetables in food processing lines such as potatoes, carrots, sweet potatoes, red beets, celeriac, swedes, pumpkins, peppers, chillies, and many more.
Benefits of TOMRA's steam peeling equipment:
• Superior quality and consistency
• Fastest peeling times for a wide range of vegetables, potatoes, carrots, beets, sweet potato, pumpkins
• Reduction of reject materials
• Highest performance solutions on the market
• Real-time adjustment
• Reduced labour requirements
• Lower operating cost: low maintenance and better reliability
• Reduced waste
• Reduced rejected product
• Low energy consumption
• Food safety
• Consistent quality
• Highest yield due to optimal steam supply and steam exhaust
• Production reporting and analysis: local and remote control + line PLC integration with feedback on machine status
TOMRA Sorting Food has recently shipped the world's largest steam peeler.
Sorting Solutions
No matter what type of food you're sorting, removal of foreign material and potentially dangerous matters is critical. That’s why you need impeccable sensor-based sorting technologies.
Sensors are like good eyes. Detection is at the core of sorting. TOMRA’s high-tech sensors are like eagle eyes; they see more and are thus able to detect and supply more information.
As the global pioneer in sensor-based sorting, TOMRA’s sorting technology continues to dynamically drive the development of increasingly better and newer sensors to further enhance our customer’s process.
TOMRA’s technology provides the highest efficiency, precision and speed. Not even the smallest particle sizes fall through the detection grid, even though it works much faster than traditional sorting technologies.
TOMRA Sorting’s sensor technologies ensure high speed processing of information such as material, shape, size, geometry, color, defect and damage characteristics, and location of objects.
TOMRA’s sorting principle: a sorting solution tailored to your needs.
To provide the right and precise sorting solution, we start working from the broad application, customize the mechanical and technological needs for your particular product, and then fine-tune the sorting machine with the needed core sorting components, including sensors, electronics, software, and ejection modules.
It’s this balance of broad technological application and customized expertise that makes TOMRA the leader in sensor-based sorting.
Verbruggen Palletizing Solutions
Your palletizing specialist
Need help stacking products? Verbruggen can help by way of automated palletizing for any stackable product type. Let us create a customized palletizing solution for you, starting from our platform of standard equipment components. 25 years ago the Dutch family company Verbruggen developed many applications that are still used today throughout the agricultural and industrial markets worldwide. Our core design is also still used in our machines today following many refinements, efficiency improvements and the latest technologies allowing us to provide state-of-the-art palletizing machines for you. We have facilities located in Europe (Emmeloord), United States (Washington State) and Asia (Dhaka) for optimal service coverage along with a strong distributor network worldwide.
Continuous Innovation
The V’s in our logo form the Technovation circle that symbolizes both Technique and Innovation. This combination is a fundamental characteristic of the Verbruggen Team. With more than 50 highly skilled professionals in-house, we have widespread knowledge in all areas of engineering, design and controls. This enables us to build high-quality machines through continuous innovations resulting in smart & efficient palletizing processes. Long-term machine refinements have also allowed us to achieve very long lasting, reliable machines. Cutting-edge control technologies, efficient equipment design and the latest innovations have also brought production capacities to unparalleled levels allowing a quick return on investment and many years of reliable equipment operation.
Unidex
Freezing Tunnels
Unidex Freezing Tunnels
The fluidized freezing tunnel (IQF) is the most popular quick-freezing device. Using the fluidization technology, the processed product behaves like a boiling liquid: air driven by fans, flows through the evaporator, and then through the perforated belt, causing the product to move, preventing it from sticking to each other. The effect of the tunnel operation is a fully frozen, loose, separated product that retains its true taste, ready for packaging!
The IQF Unidex tunnel consists of two main parts - the belt section and the evaporator section. The belt section is divided into two pressure chambers, located under the perforated, modular belt. In each chamber there are fans equipped with frequency converters that enable the control of the fluidization process and the entire freezing process. The evaporator section consists of evaporators designed, calculated and manufactured by Unidex, dedicated to various refrigerants: ammonia, freons and CO2.
A vibrating feeder installed in front of the tunnel is responsible for the continuous distribution of the product and feeds the product directly into the tunnel.
Each Unidex IQF tunnel is also equipped with an external 1st belt cleaning system, which allows periodic or continuous cleaning of the 1st belt during freezing - without stopping production.
UDS is a system that is used to remove frost from evaporators, using a blast of compressed air. Each evaporator has a compressed air tank to support it with air nozzles positioned to remove frost, snow and ice from between the evaporator fins. The entire UDS system is controlled automatically by the tunnel computer. Thanks to the use of the UDS system and the external belt cleaning system, it is possible to operate the tunnel for up to 22 hours between defrosts.
The control touch-panel is located on the door of the control cabinet and allows precise control over all components of the tunnel without the need to enter its interior.
The tunnel can also be equipped with an additional CIP (Cleaning-In-Place) system, sequential defrosting system or remote access system.
Lalesse Extrusion B.V
Lalesse Extrusion B.V
Lalesse Extrusion B.V. is the Dutch manufacturer of complete extrusion lines for the direct expansion process; for the production of light puffed snacks, shaped cereals and expanded semi products e.g. loose fills. Important equipment in an extrusion processing line are the mixer, extruder, dryer and coating equipment.
The technology behind this is called “direct extrusion”. Direct extrusion is a process where grits of corn, nuts or potatoes are forced through a die plate, under high pressure, in to the final shape. Flavorings are then added to produce a tasty snack.
XPRT Engineered Packaging
XPRT Engineered Packaging Solutions Pvt
XPRT is an association of professionals recognized as stalwarts in the field of packaging. The team at XPRT depending on the driver has the capability to integrate materials, designs, concepts and processes to provide a complete packaging system to its customers.
XPRT supplies Semi & Fully automatic lines for Tea, Spices, seeds & soft drink powder with different filling systems (lined carton packing system).
MEKITEC For Safe Food
MEKITEC For Safe Food
Mekitec is a worldwide leader and innovator in the food safety industry through its revolutionary food detector system. With decades of combined experience in developing and manufacturing X-ray imaging systems, we have engineered world-class, state-of-the-art, and cost-effective product inspection solutions for our clients. Our cost and space efficient X-ray food inspection systems are specially engineered to pick up even the smallest foreign object, including pieces of metal, glass, bone, stone, PVC, and Teflon.
This allows you to take full advantage of owning a quality food x-ray system and to continue to produce the high-quality food products your customers have come to associate your brand with.